{"id":2288507715646,"title":"Renia Colle de Cologne Contact Adhesive \/ Cement","handle":"renia-colle-de-cologne-contact-adhesive-cement","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe will almost always strongly recommend using \u003ca href=\"https:\/\/districtleathersupply.com\/collections\/adhesives\/products\/aquilim-315-water-based-adhesive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAquilim 315 water-based contact adhesive\u003c\/a\u003e for bonding leather to leather. Except for a handful of scenarios, it will do the same job as a solvent-based contact adhesive but without having to deal with the dangerous solvents.\u003c\/p\u003e\n\u003cp\u003eYou may find it necessary to use a solvent-based adhesive for scenarios such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeather-to-leather bonding applications involving exposure to high levels of heat and\/or moisture\u003c\/li\u003e\n\u003cli\u003eLeather to non-leather (e.g., Natural rubber, PVC, EVA, TR, PUR, etc.) bonding applications, particularly related to footwear \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn these cases, it's okay to break out Renia's Colle de Cologne (aka CDC). \u003c\/p\u003e\n\u003cp\u003eCDC has a similar open time (3-5 min) and working time (5-30 min) as Aquilim, and the bond will continue to strengthen over the next day after initial crystallization (which happened when you applied pressure (pressed or whacked with a hammer) to form the permanent bond between the two adhered substrates). \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003ePlease don't make the mistake of thinking about this as \"the good stuff\" relative to Aquilim. CDC is just formulated to bond leather to lots of materials that don't happen to be leather. So, \"it's not better, just, different\" ;-)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColle de Cologna does not contain Toluene or MEK. But, we still STRONGLY RECOMMEND only using it in a well-ventilated area while wearing a suitable respirator (available for about $25 on Amazon or most home improvement stores).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe will only ship this product via UPS Ground or FedEx Ground. Please contact us ASAP if your order contains other products that you may need faster. There may be an additional shipping fee in these cases. \u003c\/strong\u003e\u003c\/p\u003e","published_at":"2019-07-30T17:39:46","created_at":"2019-07-30T17:39:46","vendor":"Renia","type":"Adhesive","tags":["Aquilim","Featured","Glue","New","Shoe Craft","Supplies"],"price":1100,"price_min":1100,"price_max":9000,"price_varies":true,"compare_at_price":1100,"compare_at_price_min":1100,"compare_at_price_max":9000,"compare_at_price_varies":true,"all_variant_ids":[20470221209662,20470221242430,20470221275198],"variants":[{"id":20470221209662,"product_id":2288507715646,"product_handle":"renia-colle-de-cologne-contact-adhesive-cement","title":"8 oz","option1":"8 oz","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"image_id":null,"available":true,"name":"Renia Colle de Cologne Contact Adhesive \/ Cement - 8 oz","options":["8 oz"],"price":1100,"weight":289,"compare_at_price":1100,"inventory_quantity":28,"inventory_management":"shopify","inventory_policy":"continue","inventory_in_cart":0,"inventory_remaining":28,"incoming":false,"next_incoming_date":null,"taxable":true,"barcode":""},{"id":20470221242430,"product_id":2288507715646,"product_handle":"renia-colle-de-cologne-contact-adhesive-cement","title":"32 oz","option1":"32 oz","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"image_id":null,"available":true,"name":"Renia Colle de Cologne Contact Adhesive \/ Cement - 32 oz","options":["32 oz"],"price":3650,"weight":1108,"compare_at_price":3650,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"continue","inventory_in_cart":0,"inventory_remaining":3,"incoming":false,"next_incoming_date":null,"taxable":true,"barcode":""},{"id":20470221275198,"product_id":2288507715646,"product_handle":"renia-colle-de-cologne-contact-adhesive-cement","title":"1 gal","option1":"1 gal","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"image_id":null,"available":true,"name":"Renia Colle de Cologne Contact Adhesive \/ Cement - 1 gal","options":["1 gal"],"price":9000,"weight":3192,"compare_at_price":9000,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","inventory_in_cart":0,"inventory_remaining":2,"incoming":false,"next_incoming_date":null,"taxable":true,"barcode":""}],"available":true,"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/Renia_Colle_de_Cologne_Adhesive.jpg?v=1564522916"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/Renia_Colle_de_Cologne_Adhesive.jpg?v=1564522916","options":["Size"],"url":"\/products\/renia-colle-de-cologne-contact-adhesive-cement"}
Renia Colle de Cologne Contact Adhesive / Cement
Customer Reviews
Based on 7 reviews
Write a review
Related Products
Tack Puller
$16.00
{"id":4676808671294,"title":"Tack Puller","handle":"tack-puller","description":"Sturdy, well-constructed tool used for removing shoe tacks. I also found that it's very useful for easily removing staples (I use staples to hold the gusset in place when making a bag).","published_at":"2020-07-30T19:44:17-04:00","created_at":"2020-07-30T19:44:17-04:00","vendor":"District Leather Supply","type":"Tools","tags":["Shoe Craft","Supplies","Tools"],"price":1600,"price_min":1600,"price_max":1600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32290214838334,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tack Puller","public_title":null,"options":["Default Title"],"price":1600,"weight":170,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/TackPuller.jpg?v=1596152670"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/TackPuller.jpg?v=1596152670","options":["Title"],"media":[{"alt":null,"id":8080647487550,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/TackPuller.jpg?v=1596152670"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/TackPuller.jpg?v=1596152670","width":2048}],"content":"Sturdy, well-constructed tool used for removing shoe tacks. I also found that it's very useful for easily removing staples (I use staples to hold the gusset in place when making a bag)."}
Tack Puller
$90.00
Sturdy, well-constructed tool used for removing shoe tacks. I also found that it's very useful for easily removing staples (I use staples to hold the gusset in place when making a bag).
{"id":4676807295038,"title":"Shoemaker's Measuring Tape","handle":"shoemakers-measuring-tape","description":"\u003cp\u003eI didn't realize how much I fumbled around a 5-foot measuring tape when making shoes until I tried out one of these. It's a nifty little measuring tape just long enough for the task. Measures up to 60cm and has markings for English size and stitch length.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-07-30T19:43:38-04:00","created_at":"2020-07-30T19:43:37-04:00","vendor":"District Leather Supply","type":"Tools","tags":["Shoe Craft","Supplies","Tools"],"price":575,"price_min":575,"price_max":575,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32290213101630,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Shoemaker's Measuring Tape","public_title":null,"options":["Default Title"],"price":575,"weight":28,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/ShoemakersMeasuringTape.jpg?v=1596152619"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/ShoemakersMeasuringTape.jpg?v=1596152619","options":["Title"],"media":[{"alt":null,"id":8080643948606,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/ShoemakersMeasuringTape.jpg?v=1596152619"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/ShoemakersMeasuringTape.jpg?v=1596152619","width":2048}],"content":"\u003cp\u003eI didn't realize how much I fumbled around a 5-foot measuring tape when making shoes until I tried out one of these. It's a nifty little measuring tape just long enough for the task. Measures up to 60cm and has markings for English size and stitch length.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Shoemaker's Measuring Tape
$16.00
I didn't realize how much I fumbled around a 5-foot measuring tape when making shoes until I tried out one of these. It's a nifty little measuring tape just long enough for the task. Measures up to 60cm and has markings for English size and stitch length.
Mozart Pattern Knife
From $26.00
{"id":4676800774206,"title":"Mozart Pattern Knife","handle":"mozart-pattern-knife","description":"\u003cp\u003eI'm always skeptical about the effectiveness and general utility of replaceable blade knifes when it comes to leathercraft. The Ergokiwi won me over because of how comfortable it is, but there are still some drawbacks to the size 2 hobby blades - primarily, the tip always seems to break off.\u003c\/p\u003e\n\u003cp\u003eI decided to give this Mozart knife a try, and I've been nothing but pleased with it since I started using it a few months ago. What I like the most about this German-made knife:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe frame is sturdy with a healthy weight and a comfortable grip. The grip has has three different positions for your index finger, which gives you the ability to torque down or get surgical.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe blade is secured tightly in place with no movement whatsoever.\u003c\/li\u003e\n\u003cli\u003eThe blade shape is ideal for cutting leather - it has a square end (no point to break off when cutting curves), and the low height-to-length ratio makes it easier to see and control.\u003c\/li\u003e\n\u003cli\u003eThe awl tip at the rear comes in handy for tracing patterns and for peeling up the paper off of double-sided tape. It can sometimes surprise the back of my hand with a poke, so it's nice that it's really easy to remove. \u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-07-30T19:39:50-04:00","created_at":"2020-07-30T19:39:49-04:00","vendor":"Mozart","type":"Tool","tags":["Knives","Shoe Craft","Tools"],"price":2600,"price_min":2600,"price_max":3450,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32290200551486,"title":"Knife Only","option1":"Knife Only","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":{"id":15910496796734,"product_id":4676800774206,"position":1,"created_at":"2020-07-30T19:39:51-04:00","updated_at":"2020-07-30T19:39:51-04:00","alt":null,"width":2048,"height":1365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife2.jpg?v=1596152391","variant_ids":[32290200551486]},"available":true,"name":"Mozart Pattern Knife - Knife Only","public_title":"Knife Only","options":["Knife Only"],"price":2600,"weight":170,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":8080621240382,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife2.jpg?v=1596152391"}}},{"id":32290200584254,"title":"Knife w\/ 10 Replacement Blades","option1":"Knife w\/ 10 Replacement Blades","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":{"id":15910496895038,"product_id":4676800774206,"position":4,"created_at":"2020-07-30T19:39:51-04:00","updated_at":"2020-07-30T19:39:52-04:00","alt":null,"width":2048,"height":1365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife1.jpg?v=1596152392","variant_ids":[32290200584254]},"available":true,"name":"Mozart Pattern Knife - Knife w\/ 10 Replacement Blades","public_title":"Knife w\/ 10 Replacement Blades","options":["Knife w\/ 10 Replacement Blades"],"price":3450,"weight":170,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":8080621338686,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife1.jpg?v=1596152391"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife2.jpg?v=1596152391","\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife3.jpg?v=1596152391","\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife4.jpg?v=1596152392","\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife1.jpg?v=1596152392"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife2.jpg?v=1596152391","options":["Option"],"media":[{"alt":null,"id":8080621240382,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife2.jpg?v=1596152391"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife2.jpg?v=1596152391","width":2048},{"alt":null,"id":8080621273150,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife3.jpg?v=1596152391"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife3.jpg?v=1596152391","width":2048},{"alt":null,"id":8080621305918,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife4.jpg?v=1596152392"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife4.jpg?v=1596152392","width":2048},{"alt":null,"id":8080621338686,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife1.jpg?v=1596152391"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MozartKnife1.jpg?v=1596152391","width":2048}],"content":"\u003cp\u003eI'm always skeptical about the effectiveness and general utility of replaceable blade knifes when it comes to leathercraft. The Ergokiwi won me over because of how comfortable it is, but there are still some drawbacks to the size 2 hobby blades - primarily, the tip always seems to break off.\u003c\/p\u003e\n\u003cp\u003eI decided to give this Mozart knife a try, and I've been nothing but pleased with it since I started using it a few months ago. What I like the most about this German-made knife:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe frame is sturdy with a healthy weight and a comfortable grip. The grip has has three different positions for your index finger, which gives you the ability to torque down or get surgical.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe blade is secured tightly in place with no movement whatsoever.\u003c\/li\u003e\n\u003cli\u003eThe blade shape is ideal for cutting leather - it has a square end (no point to break off when cutting curves), and the low height-to-length ratio makes it easier to see and control.\u003c\/li\u003e\n\u003cli\u003eThe awl tip at the rear comes in handy for tracing patterns and for peeling up the paper off of double-sided tape. It can sometimes surprise the back of my hand with a poke, so it's nice that it's really easy to remove. \u003c\/li\u003e\n\u003c\/ul\u003e"}
Mozart Pattern Knife
$5.75
I'm always skeptical about the effectiveness and general utility of replaceable blade knifes when it comes to leathercraft. The Ergokiwi won me over because of how comfortable it is, but there are still some drawbacks to the size 2 hobby blades - primarily, the tip always seems to break off. I decided to give this Mozart knife a try, and I've b...
Magnetic Tack Hammer
$32.00
{"id":4676785471550,"title":"Magnetic Tack Hammer","handle":"magnetic-tack-hammer","description":"\u003cp\u003eI used to smash the heck out of my fingers when hammering tacks with lasting pincers. It saved my fingers and my sanity when I started using this magnetic hammer.\u003c\/p\u003e\n\u003cp\u003eThe magnet is pretty strong, so it can pick up several tacks at once. I spread out a handful of tacks on my workbench and that helped the situation. \u003c\/p\u003e\n\u003cp\u003eI mostly use 3.5oz or 5oz hand shoe tacks with a tiny burr at the end, which are very easy to get started in the leather with the magnetic end of this hammer. Using the magnetic end with longer wire nails has been more of a challenge for me, but it may become easier with more practice.\u003c\/p\u003e","published_at":"2020-07-30T19:31:13-04:00","created_at":"2020-07-30T19:31:12-04:00","vendor":"District Leather Supply","type":"Tools","tags":["Shoe Craft","Tools"],"price":3200,"price_min":3200,"price_max":3200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32290181185598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magnetic Tack Hammer","public_title":null,"options":["Default Title"],"price":3200,"weight":283,"compare_at_price":null,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MagneticTackHammer.jpg?v=1596151874"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MagneticTackHammer.jpg?v=1596151874","options":["Title"],"media":[{"alt":null,"id":8080569303102,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MagneticTackHammer.jpg?v=1596151874"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/MagneticTackHammer.jpg?v=1596151874","width":2048}],"content":"\u003cp\u003eI used to smash the heck out of my fingers when hammering tacks with lasting pincers. It saved my fingers and my sanity when I started using this magnetic hammer.\u003c\/p\u003e\n\u003cp\u003eThe magnet is pretty strong, so it can pick up several tacks at once. I spread out a handful of tacks on my workbench and that helped the situation. \u003c\/p\u003e\n\u003cp\u003eI mostly use 3.5oz or 5oz hand shoe tacks with a tiny burr at the end, which are very easy to get started in the leather with the magnetic end of this hammer. Using the magnetic end with longer wire nails has been more of a challenge for me, but it may become easier with more practice.\u003c\/p\u003e"}
Magnetic Tack Hammer
$34.50
I used to smash the heck out of my fingers when hammering tacks with lasting pincers. It saved my fingers and my sanity when I started using this magnetic hammer. The magnet is pretty strong, so it can pick up several tacks at once. I spread out a handful of tacks on my workbench and that helped the situation. I mostly use 3.5oz or 5oz hand ...
Curved Shoe Lasting Pincers
$34.00
{"id":4676769775678,"title":"Curved Shoe Lasting Pincers","handle":"curved-shoe-lasting-pincers","description":"\u003cp\u003eI believe these have to be the highest quality budget lasting pincers currently on the market. They may not be the most refined, but they're constructed to serve beginners and professionals alike for a long time. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe narrower, curved head of these pincers allows you to work in tighter spaces in the toe and heel. There is a flat, textured area at the bottom that is used for hammering tacks.\u003c\/p\u003e\n\u003cp\u003eWhile you could probably get away with lasting and entire shoe with these, I highly recommend also picking up the \u003cstrong\u003e\u003ca href=\"https:\/\/districtleathersupply.com\/collections\/shoe-craft\/products\/shoe-lasting-pincers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003estandard lasting pincers\u003c\/a\u003e\u003c\/strong\u003e that we offer. Especially with material like split suede and thinner lining leather, the narrower the pincers, the easier it can be to tear the leather. \u003c\/p\u003e\n\u003cp\u003eLength: approximately 200mm\u003cbr\u003eNose width: approximately 11mm\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2020-07-30T19:22:10-04:00","created_at":"2020-07-30T19:22:10-04:00","vendor":"District Leather Supply","type":"Tools","tags":["Shoe Craft","Tools"],"price":3400,"price_min":3400,"price_max":3400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32290160410686,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Curved Shoe Lasting Pincers","public_title":null,"options":["Default Title"],"price":3400,"weight":397,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincersCurved1.jpg?v=1596151387","\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincersCurved2.jpg?v=1596151387"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincersCurved1.jpg?v=1596151387","options":["Title"],"media":[{"alt":null,"id":8080519004222,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincersCurved1.jpg?v=1596151387"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincersCurved1.jpg?v=1596151387","width":2048},{"alt":null,"id":8080519036990,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincersCurved2.jpg?v=1596151387"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincersCurved2.jpg?v=1596151387","width":2048}],"content":"\u003cp\u003eI believe these have to be the highest quality budget lasting pincers currently on the market. They may not be the most refined, but they're constructed to serve beginners and professionals alike for a long time. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe narrower, curved head of these pincers allows you to work in tighter spaces in the toe and heel. There is a flat, textured area at the bottom that is used for hammering tacks.\u003c\/p\u003e\n\u003cp\u003eWhile you could probably get away with lasting and entire shoe with these, I highly recommend also picking up the \u003cstrong\u003e\u003ca href=\"https:\/\/districtleathersupply.com\/collections\/shoe-craft\/products\/shoe-lasting-pincers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003estandard lasting pincers\u003c\/a\u003e\u003c\/strong\u003e that we offer. Especially with material like split suede and thinner lining leather, the narrower the pincers, the easier it can be to tear the leather. \u003c\/p\u003e\n\u003cp\u003eLength: approximately 200mm\u003cbr\u003eNose width: approximately 11mm\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e"}
Curved Shoe Lasting Pincers
$32.00
I believe these have to be the highest quality budget lasting pincers currently on the market. They may not be the most refined, but they're constructed to serve beginners and professionals alike for a long time. The narrower, curved head of these pincers allows you to work in tighter spaces in the toe and heel. There is a flat, textured are...
Shoe Lasting Pincers
$38.00
{"id":4676768792638,"title":"Shoe Lasting Pincers","handle":"shoe-lasting-pincers","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eI believe these have to be the highest quality budget lasting pincers currently on the market. They may not be the most refined, but they're constructed to serve beginners and professionals alike for a long time. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis style of lasting pincer is often the primary set for a a shoe crafter. You can last the majority of a shoe using these, and they're less likely to tear materials like split suede and thinner lining leather than with narrow pincers. They have a small, flat textured area at the bottom for hammering tacks.\u003c\/p\u003e\n\u003cp\u003eWhile you could probably get away with lasting and entire shoe with these, I highly recommend also picking up the \u003cstrong\u003e\u003ca href=\"https:\/\/districtleathersupply.com\/collections\/shoe-craft\/products\/curved-shoe-lasting-pincers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecurved lasting pincers\u003c\/a\u003e\u003c\/strong\u003e that we offer. They will make it easier to last the toe and heel portions.\u003c\/p\u003e\n\u003cp\u003eLength: approximately 210mm\u003cbr\u003eNose width: approximately 18mm\u003cbr\u003e\u003c\/p\u003e","published_at":"2020-07-30T19:21:30-04:00","created_at":"2020-07-30T19:21:29-04:00","vendor":"District Leather Supply","type":"Tools","tags":["Shoe Craft","Tools"],"price":3800,"price_min":3800,"price_max":3800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32290159394878,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Shoe Lasting Pincers","public_title":null,"options":["Default Title"],"price":3800,"weight":340,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincers1.jpg?v=1596151291","\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincers2.jpg?v=1596151291"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincers1.jpg?v=1596151291","options":["Title"],"media":[{"alt":null,"id":8080510615614,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincers1.jpg?v=1596151291"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincers1.jpg?v=1596151291","width":2048},{"alt":null,"id":8080510648382,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincers2.jpg?v=1596151291"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/LastingPincers2.jpg?v=1596151291","width":2048}],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eI believe these have to be the highest quality budget lasting pincers currently on the market. They may not be the most refined, but they're constructed to serve beginners and professionals alike for a long time. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis style of lasting pincer is often the primary set for a a shoe crafter. You can last the majority of a shoe using these, and they're less likely to tear materials like split suede and thinner lining leather than with narrow pincers. They have a small, flat textured area at the bottom for hammering tacks.\u003c\/p\u003e\n\u003cp\u003eWhile you could probably get away with lasting and entire shoe with these, I highly recommend also picking up the \u003cstrong\u003e\u003ca href=\"https:\/\/districtleathersupply.com\/collections\/shoe-craft\/products\/curved-shoe-lasting-pincers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecurved lasting pincers\u003c\/a\u003e\u003c\/strong\u003e that we offer. They will make it easier to last the toe and heel portions.\u003c\/p\u003e\n\u003cp\u003eLength: approximately 210mm\u003cbr\u003eNose width: approximately 18mm\u003cbr\u003e\u003c\/p\u003e"}
Shoe Lasting Pincers
$34.00
I believe these have to be the highest quality budget lasting pincers currently on the market. They may not be the most refined, but they're constructed to serve beginners and professionals alike for a long time. This style of lasting pincer is often the primary set for a a shoe crafter. You can last the majority of a shoe using these, and ...
{"id":4590977876030,"title":"Modeling Tool for Sneaker Sole Removal","handle":"modeling-tool-for-sneaker-sole-removal","description":"\u003cp\u003eModeling tools have been used in leathercraft forever to create visual art using leather as the canvas. These tools also happen to work incredibly well in the process of removing sneaker uppers from soles.\u003c\/p\u003e\n\u003cp\u003eFor sneakers with a sole stitched to the upper, the stitching should be removed before attempting to separate the upper from the sole. The smaller of the two spoons on the modeling tool is perfect for sliding beneath the thread, and the tool is sturdy enough to not flex or break while pulling out the stitch. \u003c\/p\u003e\n\u003cp\u003eIf you’re using a chemical method (e.g. acetone) or an indirect heat method (e.g. oven) to de-sole, the two sizes of pointed and curved spoons on the tool work much like a bone folder would in delaminating the shoe adhesive; but, with a higher degree of precision and control. \u003c\/p\u003e\n\u003cp\u003eIf you’re using a direct heat method (e.g. heat gun), as you move the heat along the sole, place the modeling tool spoon along the top edge of the sole and directly in the path of the heat. This will heat the metal and make the spoon much more effective at delaminating the shoe adhesive and to gradually work down between the upper and sole.\u003c\/p\u003e\n\n","published_at":"2020-06-12T01:15:04-04:00","created_at":"2020-06-12T01:04:18-04:00","vendor":"District Leather Supply","type":"Tool","tags":["Shoe","Shoe Craft","Tools"],"price":850,"price_min":850,"price_max":850,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32109051904062,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Modeling Tool for Sneaker Sole Removal","public_title":null,"options":["Default Title"],"price":850,"weight":57,"compare_at_price":null,"inventory_quantity":29,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_66fe8494-b1b2-432e-b865-58dcc1245489.jpg?v=1592005545","\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_6f1f8783-d7d3-4fee-b703-dc70e378f407.jpg?v=1592005545","\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_ee1bed3c-3872-4619-8b50-e53e277d5f7a.jpg?v=1592005545"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_66fe8494-b1b2-432e-b865-58dcc1245489.jpg?v=1592005545","options":["Title"],"media":[{"alt":null,"id":7437250658366,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1080,"width":1620,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_66fe8494-b1b2-432e-b865-58dcc1245489.jpg?v=1591938895"},"aspect_ratio":1.5,"height":1080,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_66fe8494-b1b2-432e-b865-58dcc1245489.jpg?v=1591938895","width":1620},{"alt":null,"id":7437250691134,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1080,"width":1620,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_6f1f8783-d7d3-4fee-b703-dc70e378f407.jpg?v=1591938896"},"aspect_ratio":1.5,"height":1080,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_6f1f8783-d7d3-4fee-b703-dc70e378f407.jpg?v=1591938896","width":1620},{"alt":null,"id":7437250756670,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1080,"width":1620,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_ee1bed3c-3872-4619-8b50-e53e277d5f7a.jpg?v=1591938897"},"aspect_ratio":1.5,"height":1080,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_ee1bed3c-3872-4619-8b50-e53e277d5f7a.jpg?v=1591938897","width":1620}],"content":"\u003cp\u003eModeling tools have been used in leathercraft forever to create visual art using leather as the canvas. These tools also happen to work incredibly well in the process of removing sneaker uppers from soles.\u003c\/p\u003e\n\u003cp\u003eFor sneakers with a sole stitched to the upper, the stitching should be removed before attempting to separate the upper from the sole. The smaller of the two spoons on the modeling tool is perfect for sliding beneath the thread, and the tool is sturdy enough to not flex or break while pulling out the stitch. \u003c\/p\u003e\n\u003cp\u003eIf you’re using a chemical method (e.g. acetone) or an indirect heat method (e.g. oven) to de-sole, the two sizes of pointed and curved spoons on the tool work much like a bone folder would in delaminating the shoe adhesive; but, with a higher degree of precision and control. \u003c\/p\u003e\n\u003cp\u003eIf you’re using a direct heat method (e.g. heat gun), as you move the heat along the sole, place the modeling tool spoon along the top edge of the sole and directly in the path of the heat. This will heat the metal and make the spoon much more effective at delaminating the shoe adhesive and to gradually work down between the upper and sole.\u003c\/p\u003e\n\n"}
Modeling Tool for Sneaker Sole Removal
$38.00
Modeling tools have been used in leathercraft forever to create visual art using leather as the canvas. These tools also happen to work incredibly well in the process of removing sneaker uppers from soles. For sneakers with a sole stitched to the upper, the stitching should be removed before attempting to separate the upper from the sole. The ...
{"id":4551367557182,"title":"Cotton-based Thermoformable Heel Counter Material for Shoe Making","handle":"cotton-based-thermoformable-heel-counter-material-for-shoe-making","description":"\u003cp\u003eThe function of a heel counter is simply to add structure to the heel of a shoe. There are all sorts of different materials with various properties that can be used for toe puffs. The choice hinges largely on the type of shoe and the desired structural effect. \u003c\/p\u003e\n\u003cp\u003eOld school shoe construction calls for the combination of leather (some folks also use newspaper) and natural horse glue to create heel counters. It's a time-tested pairing that has worked for centuries, but it can also be time-consuming and messy. Heat and\/or solvent activated plastics have become a mainstay in modern shoe manufacturing because of their cost, consistency, and efficiency. But, more eco-friendly cotton-based alternatives have been steadily replacing plastic reinforcements with large and well-known shoe manufacturers around the world. We're proud to now be able to offer it to the maker community. \u003c\/p\u003e\n\u003cp\u003eWe are starting by selling the heel counter material in 6\" x 12\" sheets - this is enough to cut heel counters in the pattern shown in the photo. We will provide a downloadable version of this pattern soon. \u003cstrong\u003eThe pattern will not be drawn on the material you receive - it is for illustrative purposes only in the photo. \u003c\/strong\u003eDepending on how this goes, we may begin offering pre-cut heel counters as well as full sheets of material.\u003c\/p\u003e\n\u003cp\u003eIn the next few months, we are planning to expand the lineup and likely offer materials in different thicknesses and varying degrees of rigidity.\u003c\/p\u003e\n\u003cp\u003eManufacturer: Morel (Italy)\u003cbr\u003eThickness: 1.5mm\u003cbr\u003eBuilt-in adhesive: Yes\u003cbr\u003eHeat-activated: Yes, about 150 degrees (F)\u003cbr\u003eRigidity: High\u003cbr\u003eStretchy: Yes, while heated\u003cbr\u003eSkivable: Yes, and it won't gunk up bell skivers (like thermoplastic)... you need a really sharp edge to get a good skive though\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/files\/heel_counter_template_final_-_web.pdf?v=1592006055\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSample Pattern PDF\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-27T20:09:44-04:00","created_at":"2020-05-27T20:09:44-04:00","vendor":"Morel","type":"Supply","tags":["Shoe","Shoe Craft","Supplies"],"price":400,"price_min":400,"price_max":400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31992957829182,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cotton-based Thermoformable Heel Counter Material for Shoe Making","public_title":null,"options":["Default Title"],"price":400,"weight":28,"compare_at_price":null,"inventory_quantity":90,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_acfa93a0-01bb-4335-9ff0-0b862a94d3ee.jpg?v=1590624825"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_acfa93a0-01bb-4335-9ff0-0b862a94d3ee.jpg?v=1590624825","options":["Title"],"media":[{"alt":null,"id":7214835531838,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_acfa93a0-01bb-4335-9ff0-0b862a94d3ee.jpg?v=1590624825"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_acfa93a0-01bb-4335-9ff0-0b862a94d3ee.jpg?v=1590624825","width":4032}],"content":"\u003cp\u003eThe function of a heel counter is simply to add structure to the heel of a shoe. There are all sorts of different materials with various properties that can be used for toe puffs. The choice hinges largely on the type of shoe and the desired structural effect. \u003c\/p\u003e\n\u003cp\u003eOld school shoe construction calls for the combination of leather (some folks also use newspaper) and natural horse glue to create heel counters. It's a time-tested pairing that has worked for centuries, but it can also be time-consuming and messy. Heat and\/or solvent activated plastics have become a mainstay in modern shoe manufacturing because of their cost, consistency, and efficiency. But, more eco-friendly cotton-based alternatives have been steadily replacing plastic reinforcements with large and well-known shoe manufacturers around the world. We're proud to now be able to offer it to the maker community. \u003c\/p\u003e\n\u003cp\u003eWe are starting by selling the heel counter material in 6\" x 12\" sheets - this is enough to cut heel counters in the pattern shown in the photo. We will provide a downloadable version of this pattern soon. \u003cstrong\u003eThe pattern will not be drawn on the material you receive - it is for illustrative purposes only in the photo. \u003c\/strong\u003eDepending on how this goes, we may begin offering pre-cut heel counters as well as full sheets of material.\u003c\/p\u003e\n\u003cp\u003eIn the next few months, we are planning to expand the lineup and likely offer materials in different thicknesses and varying degrees of rigidity.\u003c\/p\u003e\n\u003cp\u003eManufacturer: Morel (Italy)\u003cbr\u003eThickness: 1.5mm\u003cbr\u003eBuilt-in adhesive: Yes\u003cbr\u003eHeat-activated: Yes, about 150 degrees (F)\u003cbr\u003eRigidity: High\u003cbr\u003eStretchy: Yes, while heated\u003cbr\u003eSkivable: Yes, and it won't gunk up bell skivers (like thermoplastic)... you need a really sharp edge to get a good skive though\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/files\/heel_counter_template_final_-_web.pdf?v=1592006055\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSample Pattern PDF\u003c\/a\u003e\u003c\/p\u003e"}
Cotton-based Thermoformable Heel Counter Material for Shoe Making
$8.50
The function of a heel counter is simply to add structure to the heel of a shoe. There are all sorts of different materials with various properties that can be used for toe puffs. The choice hinges largely on the type of shoe and the desired structural effect. Old school shoe construction calls for the combination of leather (some folks also...
{"id":4551365656638,"title":"Cotton-based Thermoformable Toe Puff Material for Shoe Making","handle":"cotton-based-thermoformable-toe-puff-material-for-shoe-making","description":"\u003cp\u003eToe Puff? Sort of a funny name for something so important for crafting shoes. \u003c\/p\u003e\n\u003cp\u003eThe function of a toe puff is simply to add structure to the toe of a shoe. There are all sorts of different materials with various properties that can be used for toe puffs. The choice hinges largely on the type of shoe and the desired structural effect. \u003c\/p\u003e\n\u003cp\u003eOld school shoe construction calls for the combination of leather (some folks also use newspaper) and natural horse glue to create toe puffs. It's a time-tested pairing that has worked for centuries, but it can also be time-consuming and messy. Heat and\/or solvent activated plastics have become a mainstay in modern shoe manufacturing because of their cost, consistency, and efficiency. But, more eco-friendly cotton-based alternatives have been steadily replacing plastic reinforcements with large and well-known shoe manufacturers around the world. We're proud to now be able to offer it to the maker community. \u003c\/p\u003e\n\u003cp\u003eWe are starting by selling the material in 7.5\" x 8\" sheets - this is enough to cut two toe puffs in the pattern shown in the photo. We will provide a downloadable version of this pattern soon. \u003cstrong\u003eThe pattern will not be drawn on the material you receive - it is for illustrative purposes only in the photo. \u003c\/strong\u003eDepending on how this goes, we may begin offering pre-cut toe puffs as well as full sheets of material.\u003c\/p\u003e\n\u003cp\u003eIn the next few months, we are planning to expand the lineup and likely offer materials in different thicknesses and varying degrees of rigidity.\u003c\/p\u003e\n\u003cp\u003eManufacturer: Morel (Italy)\u003cbr\u003eThickness: 0.85mm\u003cbr\u003eBuilt-in adhesive: Yes\u003cbr\u003eHeat-activated: Yes, about 150 degrees (F)\u003cbr\u003eRigidity: Low (Soft)\u003cbr\u003eStretchy: Yes, while heated\u003cbr\u003eSkivable: Yes, and it won't gunk up bell skivers... you need a really sharp edge to get a good skive though\u003c\/p\u003e","published_at":"2020-05-27T19:16:36-04:00","created_at":"2020-05-27T20:08:42-04:00","vendor":"Morel","type":"Supply","tags":["Shoe","Shoe Craft","Supplies"],"price":400,"price_min":400,"price_max":400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31992955109438,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cotton-based Thermoformable Toe Puff Material for Shoe Making","public_title":null,"options":["Default Title"],"price":400,"weight":28,"compare_at_price":null,"inventory_quantity":102,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_5a87f5f5-d323-4199-b164-00775e5acebd.jpg?v=1590624760"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_5a87f5f5-d323-4199-b164-00775e5acebd.jpg?v=1590624760","options":["Title"],"media":[{"alt":null,"id":7214822752318,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_5a87f5f5-d323-4199-b164-00775e5acebd.jpg?v=1590624760"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/image_5a87f5f5-d323-4199-b164-00775e5acebd.jpg?v=1590624760","width":4032}],"content":"\u003cp\u003eToe Puff? Sort of a funny name for something so important for crafting shoes. \u003c\/p\u003e\n\u003cp\u003eThe function of a toe puff is simply to add structure to the toe of a shoe. There are all sorts of different materials with various properties that can be used for toe puffs. The choice hinges largely on the type of shoe and the desired structural effect. \u003c\/p\u003e\n\u003cp\u003eOld school shoe construction calls for the combination of leather (some folks also use newspaper) and natural horse glue to create toe puffs. It's a time-tested pairing that has worked for centuries, but it can also be time-consuming and messy. Heat and\/or solvent activated plastics have become a mainstay in modern shoe manufacturing because of their cost, consistency, and efficiency. But, more eco-friendly cotton-based alternatives have been steadily replacing plastic reinforcements with large and well-known shoe manufacturers around the world. We're proud to now be able to offer it to the maker community. \u003c\/p\u003e\n\u003cp\u003eWe are starting by selling the material in 7.5\" x 8\" sheets - this is enough to cut two toe puffs in the pattern shown in the photo. We will provide a downloadable version of this pattern soon. \u003cstrong\u003eThe pattern will not be drawn on the material you receive - it is for illustrative purposes only in the photo. \u003c\/strong\u003eDepending on how this goes, we may begin offering pre-cut toe puffs as well as full sheets of material.\u003c\/p\u003e\n\u003cp\u003eIn the next few months, we are planning to expand the lineup and likely offer materials in different thicknesses and varying degrees of rigidity.\u003c\/p\u003e\n\u003cp\u003eManufacturer: Morel (Italy)\u003cbr\u003eThickness: 0.85mm\u003cbr\u003eBuilt-in adhesive: Yes\u003cbr\u003eHeat-activated: Yes, about 150 degrees (F)\u003cbr\u003eRigidity: Low (Soft)\u003cbr\u003eStretchy: Yes, while heated\u003cbr\u003eSkivable: Yes, and it won't gunk up bell skivers... you need a really sharp edge to get a good skive though\u003c\/p\u003e"}
Cotton-based Thermoformable Toe Puff Material for Shoe Making
$4.00
Toe Puff? Sort of a funny name for something so important for crafting shoes. The function of a toe puff is simply to add structure to the toe of a shoe. There are all sorts of different materials with various properties that can be used for toe puffs. The choice hinges largely on the type of shoe and the desired structural effect. Old sc...
Sale
Aquilim 130 Water-Based Contact Adhesive
From $16.00 $32.00
{"id":4525717225534,"title":"Aquilim 130 Water-Based Contact Adhesive","handle":"aquilim-130-water-based-contact-adhesive","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eAquilim 130 is a water-based contact adhesive specifically intended for forming permanent bonds related to shoe craft. It contains\u003cspan\u003e \u003c\/span\u003ea head activated cross-linker. \u003c\/p\u003e\n\u003cp\u003eWe conduct thorough research and testing on everything we sell, and we only sell products that we stand behind 100%. We've tested Aquilim 130 in-house while making\u003cspan\u003e \u003c\/span\u003eour own sneakers, and have also enlisted the help from some prominent sneaker makers out in the community. It's a winner, though it can be a little tricky to use compared to other commonly used solvent-based adhesives. \u003c\/p\u003e\n\u003cp\u003eWe'll be creating a YouTube instructional video for this soon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial compatibility:\u003cbr\u003e\u003c\/strong\u003eAll materials encountered in shoes can be bonded: Leather, rubber, PUR, Vulkollan, Perbunan, PVC, TR, Cork, felt, fabric, certain EVA types, etc. Can be used as adhesive or as a primer before the application of a Polychloroprene adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr\u003eGrind or roughen all materials. PUR\/rubber unit soles can and TR soles have to be halogenated with RENIA – Rehagol (available at DLS soon). Leather and freshly split Vulkollan can be bonded without preparation (testing recommended). The adhesive can be sprayed or applied with a roll or brush. Let dry and activate at 176 °F. The heat activation starts the cross-linking process which greatly increases the resistance against water, heat, and chemical influences.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrying Time:\u003c\/strong\u003e\u003cbr\u003eDepending to the combination of the materials and the method of application, the drying-time is 30-60 min. The unique formulation of an adhesive already premixed with a heat-activated cross-linker allows reactivation of the dried adhesive film at any time, while offering an extremely high resistance against environmental influences. Reactivation is possible with an IR lamp, quartz heater, high-capacity IR-UV lamp or heat gun. The adhesive turns clear as soon as it is completely dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure:\u003cbr\u003e\u003c\/strong\u003e15 - 60 psi for at least 30 seconds. Best results will be achieved using a sole press.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-05-12T09:36:06-04:00","created_at":"2020-05-12T09:36:06-04:00","vendor":"Renia","type":"Adhesive","tags":["Aquilim","Glue","Shoe","Shoe Craft","Supplies"],"price":1600,"price_min":1600,"price_max":7500,"available":true,"price_varies":true,"compare_at_price":3200,"compare_at_price_min":3200,"compare_at_price_max":6500,"compare_at_price_varies":true,"variants":[{"id":31875447390270,"title":"8 oz","option1":"8 oz","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aquilim 130 Water-Based Contact Adhesive - 8 oz","public_title":"8 oz","options":["8 oz"],"price":1600,"weight":289,"compare_at_price":null,"inventory_quantity":59,"inventory_management":"shopify","inventory_policy":"continue","barcode":null},{"id":31875447423038,"title":"32 oz","option1":"32 oz","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aquilim 130 Water-Based Contact Adhesive - 32 oz","public_title":"32 oz","options":["32 oz"],"price":3800,"weight":1108,"compare_at_price":3200,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":31875447455806,"title":"100 oz","option1":"100 oz","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aquilim 130 Water-Based Contact Adhesive - 100 oz","public_title":"100 oz","options":["100 oz"],"price":7500,"weight":3192,"compare_at_price":6500,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":[],"featured_image":null,"options":["Size"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eAquilim 130 is a water-based contact adhesive specifically intended for forming permanent bonds related to shoe craft. It contains\u003cspan\u003e \u003c\/span\u003ea head activated cross-linker. \u003c\/p\u003e\n\u003cp\u003eWe conduct thorough research and testing on everything we sell, and we only sell products that we stand behind 100%. We've tested Aquilim 130 in-house while making\u003cspan\u003e \u003c\/span\u003eour own sneakers, and have also enlisted the help from some prominent sneaker makers out in the community. It's a winner, though it can be a little tricky to use compared to other commonly used solvent-based adhesives. \u003c\/p\u003e\n\u003cp\u003eWe'll be creating a YouTube instructional video for this soon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial compatibility:\u003cbr\u003e\u003c\/strong\u003eAll materials encountered in shoes can be bonded: Leather, rubber, PUR, Vulkollan, Perbunan, PVC, TR, Cork, felt, fabric, certain EVA types, etc. Can be used as adhesive or as a primer before the application of a Polychloroprene adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr\u003eGrind or roughen all materials. PUR\/rubber unit soles can and TR soles have to be halogenated with RENIA – Rehagol (available at DLS soon). Leather and freshly split Vulkollan can be bonded without preparation (testing recommended). The adhesive can be sprayed or applied with a roll or brush. Let dry and activate at 176 °F. The heat activation starts the cross-linking process which greatly increases the resistance against water, heat, and chemical influences.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrying Time:\u003c\/strong\u003e\u003cbr\u003eDepending to the combination of the materials and the method of application, the drying-time is 30-60 min. The unique formulation of an adhesive already premixed with a heat-activated cross-linker allows reactivation of the dried adhesive film at any time, while offering an extremely high resistance against environmental influences. Reactivation is possible with an IR lamp, quartz heater, high-capacity IR-UV lamp or heat gun. The adhesive turns clear as soon as it is completely dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure:\u003cbr\u003e\u003c\/strong\u003e15 - 60 psi for at least 30 seconds. Best results will be achieved using a sole press.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Aquilim 130 Water-Based Contact Adhesive
$4.00
Aquilim 130 is a water-based contact adhesive specifically intended for forming permanent bonds related to shoe craft. It contains a head activated cross-linker. We conduct thorough research and testing on everything we sell, and we only sell products that we stand behind 100%. We've tested Aquilim 130 in-house while making our own sneakers...
{"id":4446855725118,"title":"Air Jordan 1 Shoe Lasts - Tendo Hinge","handle":"air-jordan-1-shoe-lasts-tendo-hinge","description":"\u003cp\u003eEspecially for beginners, the task of finding shoe lasts can be daunting and expensive. It was definitely a struggle for me, and cost way more than it needed to. Whether you're a noob or a seasoned vet, our goal is to build a last program that makes it easier, faster, and cheaper to get what you need. \u003c\/p\u003e\n\u003cp\u003eMostly because it's the first shoe I worked with, our last program is kicking off with the Air Jordan 1 (AJ1). We'll continue to expand the program and add more last styles over time.\u003c\/p\u003e\n\u003cp\u003eAbout these AJ1 lasts: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSizes (Men's US) 5 through 12 1\/2 in half sizes, then size 13, 14, and 15\u003c\/li\u003e\n\u003cli\u003eD width\u003c\/li\u003e\n\u003cli\u003eTendo hinge\u003c\/li\u003e\n\u003cli\u003eNo steel heel plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe ask that you please bear with us while we work out our stock levels. We've been steadily increasing our order size with the manufacturer, and we're working through the logistical kinks that go along with that. Best thing to do if your size is sold out is to drop us a line to check on the ETA and sign up for the Back in Stock email alert. \u003c\/p\u003e\n\u003cp\u003eQuantity discounts are available for full size runs (generally, 8+ pairs). \u003ca href=\"https:\/\/districtleathersupply.com\/pages\/contact-us\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDrop us a line\u003c\/a\u003e to inquire. \u003c\/p\u003e","published_at":"2020-02-20T11:49:34-05:00","created_at":"2020-02-20T11:22:03-05:00","vendor":"District Leather Supply","type":"Tools","tags":["Shoe Craft","Tools"],"price":7500,"price_min":7500,"price_max":7500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32206025457726,"title":"5","option1":"5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 5","public_title":"5","options":["5"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":32206025523262,"title":"5.5","option1":"5.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 5.5","public_title":"5.5","options":["5.5"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":32206025654334,"title":"6","option1":"6","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 6","public_title":"6","options":["6"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":32206026113086,"title":"6.5","option1":"6.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 6.5","public_title":"6.5","options":["6.5"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":32206026276926,"title":"7","option1":"7","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 7","public_title":"7","options":["7"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580878209086,"title":"7.5","option1":"7.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 7.5","public_title":"7.5","options":["7.5"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580877783102,"title":"8","option1":"8","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 8","public_title":"8","options":["8"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580877815870,"title":"8.5","option1":"8.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 8.5","public_title":"8.5","options":["8.5"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580877848638,"title":"9","option1":"9","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 9","public_title":"9","options":["9"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580877881406,"title":"9.5","option1":"9.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 9.5","public_title":"9.5","options":["9.5"],"price":7500,"weight":2835,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580877914174,"title":"10","option1":"10","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 10","public_title":"10","options":["10"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580877946942,"title":"10.5","option1":"10.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 10.5","public_title":"10.5","options":["10.5"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580877979710,"title":"11","option1":"11","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 11","public_title":"11","options":["11"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580878012478,"title":"11.5","option1":"11.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 11.5","public_title":"11.5","options":["11.5"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580878045246,"title":"12","option1":"12","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 12","public_title":"12","options":["12"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580878078014,"title":"12.5","option1":"12.5","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 12.5","public_title":"12.5","options":["12.5"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580878110782,"title":"13","option1":"13","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 13","public_title":"13","options":["13"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580878143550,"title":"14","option1":"14","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 14","public_title":"14","options":["14"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":31580878176318,"title":"15","option1":"15","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Air Jordan 1 Shoe Lasts - Tendo Hinge - 15","public_title":"15","options":["15"],"price":7500,"weight":3685,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/Jordan_Tendo.jpg?v=1582218755"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/Jordan_Tendo.jpg?v=1582218755","options":["Size"],"media":[{"alt":null,"id":6365250093118,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3354,"width":4472,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/Jordan_Tendo.jpg?v=1582218755"},"aspect_ratio":1.333,"height":3354,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/Jordan_Tendo.jpg?v=1582218755","width":4472}],"content":"\u003cp\u003eEspecially for beginners, the task of finding shoe lasts can be daunting and expensive. It was definitely a struggle for me, and cost way more than it needed to. Whether you're a noob or a seasoned vet, our goal is to build a last program that makes it easier, faster, and cheaper to get what you need. \u003c\/p\u003e\n\u003cp\u003eMostly because it's the first shoe I worked with, our last program is kicking off with the Air Jordan 1 (AJ1). We'll continue to expand the program and add more last styles over time.\u003c\/p\u003e\n\u003cp\u003eAbout these AJ1 lasts: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSizes (Men's US) 5 through 12 1\/2 in half sizes, then size 13, 14, and 15\u003c\/li\u003e\n\u003cli\u003eD width\u003c\/li\u003e\n\u003cli\u003eTendo hinge\u003c\/li\u003e\n\u003cli\u003eNo steel heel plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe ask that you please bear with us while we work out our stock levels. We've been steadily increasing our order size with the manufacturer, and we're working through the logistical kinks that go along with that. Best thing to do if your size is sold out is to drop us a line to check on the ETA and sign up for the Back in Stock email alert. \u003c\/p\u003e\n\u003cp\u003eQuantity discounts are available for full size runs (generally, 8+ pairs). \u003ca href=\"https:\/\/districtleathersupply.com\/pages\/contact-us\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDrop us a line\u003c\/a\u003e to inquire. \u003c\/p\u003e"}
Air Jordan 1 Shoe Lasts - Tendo Hinge
$75.00
Especially for beginners, the task of finding shoe lasts can be daunting and expensive. It was definitely a struggle for me, and cost way more than it needed to. Whether you're a noob or a seasoned vet, our goal is to build a last program that makes it easier, faster, and cheaper to get what you need. Mostly because it's the first shoe I w...
{"id":4413140303934,"title":"Renia Solvent \/ Thinner for Renia Contact Adhesives","handle":"renia-solvent-thinner-for-contact-adhesive","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003e1 Liter container (contact us if you'd like to inquire about ordering larger quantities)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe solvent in Colle De Cologne will inevitably evaporate when the container \/ glue pot is open. When this happens, you'll notice that the glue starts to get stringy and gummy. If this happens, Renia's solvent\/thinner product can be used to reconstitute your glue. It also works for thinning any of Renia's other solvent-based contact adhesives, and can be used for cleaning glue pots, brushes, and applicators. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product does not contain Toluene or MEK. But, we still STRONGLY RECOMMEND only using it in a well-ventilated area while wearing a suitable respirator (available for about $25 on Amazon or most home improvement stores).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe will only ship this product via UPS Ground or FedEx Ground. Please contact us ASAP if your order contains other products that you may need faster. There may be an additional shipping fee in these cases. \u003c\/strong\u003e\u003c\/p\u003e","published_at":"2019-12-31T15:43:42-05:00","created_at":"2019-12-31T15:43:42-05:00","vendor":"Renia","type":"Adhesive","tags":["Aquilim","Featured","Glue","New","Shoe Craft","Supplies"],"price":2200,"price_min":2200,"price_max":2200,"available":true,"price_varies":false,"compare_at_price":2200,"compare_at_price_min":2200,"compare_at_price_max":2200,"compare_at_price_varies":false,"variants":[{"id":31466215768126,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Renia Solvent \/ Thinner for Renia Contact Adhesives","public_title":null,"options":["Default Title"],"price":2200,"weight":567,"compare_at_price":2200,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/DWK_0324.jpg?v=1577825072"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/DWK_0324.jpg?v=1577825072","options":["Title"],"media":[{"alt":null,"id":6086945243198,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/DWK_0324.jpg?v=1577825072"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2281\/0733\/products\/DWK_0324.jpg?v=1577825072","width":2048}],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003e1 Liter container (contact us if you'd like to inquire about ordering larger quantities)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe solvent in Colle De Cologne will inevitably evaporate when the container \/ glue pot is open. When this happens, you'll notice that the glue starts to get stringy and gummy. If this happens, Renia's solvent\/thinner product can be used to reconstitute your glue. It also works for thinning any of Renia's other solvent-based contact adhesives, and can be used for cleaning glue pots, brushes, and applicators. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product does not contain Toluene or MEK. But, we still STRONGLY RECOMMEND only using it in a well-ventilated area while wearing a suitable respirator (available for about $25 on Amazon or most home improvement stores).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe will only ship this product via UPS Ground or FedEx Ground. Please contact us ASAP if your order contains other products that you may need faster. There may be an additional shipping fee in these cases. \u003c\/strong\u003e\u003c\/p\u003e"}
Renia Solvent / Thinner for Renia Contact Adhesives
$75.00
1 Liter container (contact us if you'd like to inquire about ordering larger quantities) The solvent in Colle De Cologne will inevitably evaporate when the container / glue pot is open. When this happens, you'll notice that the glue starts to get stringy and gummy. If this happens, Renia's solvent/thinner product can be used to reconstitut...
